ㆍCRUISE PHASE PROCEDURES
- ALT CRZ → TCAS BLW SET
- SYSTEM CHECK → FLOW PTN + ALT, ENG OIL PRESSURE, BLEED, ELEC, HYD QTY, F/CTL, FUEL QTY AND DISTRIBUTION, OXY QTY
- MFD SETUP PTN → ATC MSG, SURV, NAV PRIMARY, FUEL & LOAD, STEP ALT, F-PLN, ETP, DEST, SEC F-PLN
- OIS ENROUTE CHART → CHECK ROUTE, PPOS, ETP, OPEN LDG PERF
- NSS AVNCS → REQ WX INFO, ENR ALTN APRT, DEST APRT
- WPT 통과 또는 30분 경과 시 → FOB + FU 점검, STEP ALT, LDG PERF, BARO REF, ECAM STS PAGE
- FIR 통과 시 → POS REPORT, CHECK ATC AGENCY & FREQ
- ETP 통과 시 → DEST/ALTN APRT WX INFO, NAV CHARTS, LDG PERF 계산, CPNY FREQ
※ ENROUTE OCEANIC OPERATIONS → CPDLC 연결 상태를 확인하기 위해 ADS가 연결된 경우에는 FIR 경계 통과 시 위치 보고를 반드시 해야 함
ㆍSHIFT CHANGE PROCEDURES
- 초기 설정 절차와 동일한 순서로 수행
- RCL, STS, LOGBOOK, ECAM ALERTS → 항공기 상태 및 비행 중 발생한 ECAM MSG 내역 확인
- FLOW PTN → OVHD PANEL, FCU, PEDESTAL PANEL에서 정상 위치가 아닌 것 확인
- RMP → CURRENT/NEXT ATC CONTROL AGENCY AND FREQ, SQ CODE
- MFD → ATC MSG, SURV, INIT, PERF, F-PLN, SEC F-PLN, STORED CPNY RTE → CHK ALL F-PLAN FIX, ALTN APRT WX, LDG PERF
- NSS AVNCS → ALTN APRT WX, SIGMET, OCC MSG 등 확인
- SYSTEM CHK → CHK ALL SYSTEM STATUS
ㆍSHIFT CHANGE BRIEFING
- CURRENT FLT STS → SIGNS, WX RDR, FCU, ETA, FUEL, RMP, SPEAKER VOL, CURRENT POS
- ENROUTE CHANGE STS → DCT, AIRWAY CHANGE, ETC
- AIRPLANE SYSTEM STS → RCL, STS, MEL, CDL, OEB, ECAM ALERTS
- ENROUTE ALTERNATE AIRPORT WEATHER STS → NSS AVNCS MSG
- NEARBY TRAFFICS STS → PRECEDING ACFT CALLSIGN, DEST, ETC
- PAX AND CABIN CREW STS → CREW REST TIME
- OTHERS → REST SEAT, ETC